PA / POM

PA / POM

PA / POM (Polyamide / Polyoxymethylene)

Semi-finished products such as plates, round rods and finished parts made of polyamide (PA) and POM

Polyamide (abbreviation : PA) and polyoxymethylene (abbreviation : POM): Sheets, rods and finished parts made of PA and POM have higher strength values than semi-finished products made of PE or PP. They are bulk plastics and can be machined to higher tolerances. Semi-finished products made of POM are extruded, semi-finished products made of PA are cast (lower-stress variant) or extruded. In addition to the standard grades, PA in particular can be modified in many ways with additives, so that desired properties are promoted (e.g. sliding behavior) and poor properties (e.g. lack of UV resistance). PA and POM unfortunately absorb water, so that an application in a humid environment would at least have to be tested.

PA / POM: The materials - technical properties

The specific weight, approx. 1.2 gr/cm³ for polyamide and approx.1.4 gr/cm³ for POM is still very low compared to many other materials. The materials are very good machinable and can be equipped with very fine tolerances.

From standards to special products

Standard color PA semi-finished products is natural or black, but special colors are possible from corresponding minimum quantities of approx. 2,000 kg. Standard color POM is white and black. Polyamide plastic sheets are characterized by a high variation possibilities : besides some standard special settings like PA 6, PA 66, also special settings like PA slippery, PA electrically conductive, PA antistatic, PA UV resistant, PA glass fiber reinforced and many more are possible.

Would you like more information about PA / POM?
Please send us your questions in the form and we will get back to you.






      Colors
      • Natural
      • Black  

      *Special colors are possible from a minimum quantity of approx. 2 t.

       

      Formats extruded sheets ( material thickness 1 – 15 mm ) 
      2000 x 1000 mm  

      3000 x 1250 mm

       

      We will gladly cut your desired format from one of our standard formats!

      ( Not all intermediate sizes available! Special dimensions / thicknesses are possible from minimum quantities of 5 t )

       

      If you have any questions, please contact us by phone or e-mail.

      Colors
      • Natural
      • Black  
      • Blue  

      *Special colors are possible from a minimum quantity of approx. 2 t

       

      Formats cast sheets ( material thickness 10 – 100 mm )
       

      2500 x 1250 mm

       

      We will gladly cut your desired format from one of our standard formats!

       

      If you have any questions, please contact us by phone or e-mail.

      Colors
      • Natural
      • Black  

       

      Panel sizes ( material thickness 1 – 80 mm )
       

      2000 x 1000 mm

      4000 x 2000 mm

       

      We will gladly cut your desired format from one of our standard formats!

      ( Not all intermediate sizes available! Special dimensions / thicknesses are possible from minimum quantities of 5 t )

       

      If you have any questions, please contact us by phone or e-mail.

      THIS COULD ALSO INTEREST YOU!