PS

Polystyrene (PS)

PS (Polystyrene)

Semi-finished products such as sheets, foils, round rods and finished parts made of polystyrene (PS)

Polystyrene (abbreviation : SB) is an engineering plastic (thermoplastic) that is very easy to process and, at 1.05 g/cm³, has a relatively low weight. The moisture absorption of polysterol is 0.1%, the modulus of elasticity is a relatively low 1,700 N/mm², although the plastic gives a very hard subjective impression, and the material allows a very high surface finish.

PS : The material - technical properties

We offer extruded polystyrene sheets with thicknesses up to 120 mm without shrinkage and with low stress, due to the production process, as well as cut-to-size and shaped parts (milled parts, turned parts). An advantage of these large sheet thicknesses up to 120 mm is that it is not necessary to glue many thin extruded polystyrene sheets to one thick sheet to achieve the desired thickness for the component, as is sometimes the case.

Possible colors and quantities

Standard colors of polystyrene semi-finished products are white, gray and black. Special colors are possible with corresponding minimum quantities from approx. 2,000 – 3,000 kg.

 

Delivery quantities of these polystyrene semi-finished products are for pressed sheets also single pieces, in the range of polystyrene extrusion sheets at least 20-30 sheets per order. For quotations on polystyrene sheets, blanks or molded parts, just ask us, we will be happy to make you an offer.

Do you want more information about PS?
Please send us your questions in the form and we will get back to you.






    Colors
    • Natural  
    • Light green  
    • White  
    • Grey  
    • Yellow  
    • Green  
    • Blue  
    • Red  
    • Dark red  
    • Black  
    • Complete RAL palette possible

     

    Formats extruded sheets/rolls ( material thickness 0,2 – 12 mm )
    Sheets max. Width 2800 mm Roles max width 1400 mm

    We will gladly cut your desired format from one of our standard formats!

    ( Special dimensions / thicknesses are possible from minimum quantities of 5 t )

     

     

    If you have any questions, please contact us by phone or e-mail.

    Colors
    • White  
    • Gray  
    • Black  

    *Special colors are possible with minimum quantities of 5 t

    Formats pressed boards ( material thickness 8 – 100 mm )
     

    2000 x 2000 mm

     

    3000 x 2500 mm

    We will gladly cut your desired format from one of our standard formats!

    ( Special dimensions / thicknesses are possible from minimum quantities of 5 t )

     

     

    If you have any questions, please contact us by phone or e-mail.

    THIS COULD ALSO INTEREST YOU